Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Hayward Homeowners
Windows and doors are the parts of a Hayward home that fail in ways you can feel before you can see: a bedroom that bakes on a warm afternoon, a patio slider that sticks halfway, a front door that no longer closes flush. Replacing them isn’t cosmetic. It changes how much heat moves through the wall, how much noise gets in from the street, and how well the house holds a comfortable temperature through a long dry summer. Our technicians have up to 11 years of experience matching product to the specific opening, the wall assembly, and the budget. We give you a written, line-item estimate before anything is ordered, and the estimate sets the final price. Call (833) 510-5312 to schedule a free estimate on your Hayward windows and doors.
Key takeaways:
- Window replacement in Hayward typically runs $4,500 – $15,000, depending on size, count, and product tier.
- Impact-rated and energy-efficient lines are both available, so you’re not pushed toward one product.
- We handle window and door work alongside roofing, siding, and remodeling, so one contract covers the whole envelope.
- Free estimates are written line-item, and the written estimate sets the final price.
What Our Windows & Doors Service Includes
Windows and doors get talked about as one category because homeowners usually think about them together, but they’re different jobs with different failure points. Here’s how we break the work down.
Window Installation
Window installation means putting a new window into a new or existing opening, including the framing, flashing, and trim that make it weathertight. You need it for a new build, an addition, or a wall that’s being opened up during a remodel. We set the window level and square, flash the rough opening properly, and finish the interior and exterior trim so the wall assembly stays sealed.
Door Installation
Door installation covers entry doors, interior doors, and the jambs and hardware that go with them. You need it when a door has swelled, warped, stopped latching, or when you’re changing the style of a facade. We work with Therma-Tru entry systems and set the threshold and jamb so the door swings and latches the way it should, rather than getting planed down to fit a crooked opening.
Window Replacement
Window replacement is a swap of an existing window for a new unit in the same opening, usually without changing the size. You need it when the original windows are single-pane, fogged between the glass, hard to open, or drafty. We measure every opening, confirm the product tier against the wall condition, and replace the unit with new flashing and sealant rather than dropping it into a failed opening.
Impact Windows & Doors
Impact windows and doors use laminated or specially constructed glass that resists breaking under a strike. Homeowners choose them for storm protection, security, and noise reduction, and they’re a common request on remodels where the glazing is being upgraded anyway. We work with impact-rated lines including PGT and CGI, so the product matches the opening and the exposure. If you’re weighing impact glass against standard glazing, we’ll walk you through the tradeoffs in person rather than over the phone.
Energy-Efficient Windows
Energy-efficient windows use insulated glass, low-E coatings, and better frame and spacer construction to slow heat transfer. You need them when a room runs hot in summer, when utility bills creep up, or when the existing glass is single-pane. We match the glazing and frame package to the orientation of the wall and the amount of sun the opening actually gets, because a south-facing window and a shaded one don’t need the same specification.
Sliding & Patio Doors
Sliding and patio doors are the large glazed openings that connect the house to a yard or deck. You need service when the track wears, the rollers bind, the glass fogs, or the frame has settled out of square. We replace the unit and the track together, set the threshold so water drains away from the house, and check the lock and handle hardware before we call the job done.
Custom & Geometric Windows
Custom and geometric windows are arched, angled, round, or oversized units that don’t come off a standard size list. You need them for a feature wall, a gable, a stairwell, or an addition with a non-standard opening. These require field measurement and a templated order, and we handle that measurement so the unit arrives to the right dimensions the first time.
Impact Garage Doors
An impact garage door is a reinforced door built to hold up under a strike without the panel failing. You need one when the garage is part of the protected envelope of the house or when the existing door is thin and dented. We size the door to the opening and confirm the track and spring hardware match the weight of the new panel, because a heavier door on the original springs will not balance properly. High-tension springs and cables are genuinely dangerous to adjust; that work belongs to a trained technician, not a homeowner with a ladder.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with Therma-Tru on entry door systems. Their doors are built around a solid core and a frame that holds its shape, which matters in a house where the front door takes direct afternoon sun. We know where those systems wear first: the weatherstripping along the jamb, the threshold sweep, and the hinge side where the door carries its weight. That’s usually where a door starts to leak air long before the panel itself is a problem.
We also work with ViewLux on glazing lines, and with Mr-Glass on glass and window products where the opening calls for it. The reason we carry more than one line is simple: the right window for a shaded north-facing bedroom isn’t the right window for a west wall that gets hammered all afternoon, and a single product family can’t cover both well. Whether you have Therma-Tru, ViewLux, Mr-Glass, or any other make, we can help.
Signs You Need Windows & Doors Right Now
- Fog or condensation between the panes. That means the seal on the insulated glass unit has failed and moisture is trapped inside. The window won’t dry out on its own, and the insulating value is already gone.
- A door that sticks, drags, or won’t latch. Doors swell and frames settle, and a door that won’t close flush is letting air and water past the seal. Left alone, the jamb and threshold take on moisture and the problem gets more expensive.
- Visible daylight around a closed frame. If you can see light past the weatherstripping, you’re paying to heat and cool the street. This one shows up fast on a windy day.
- A room that’s noticeably hotter or colder than the rest of the house. One bad window can drag a whole room out of balance. Before you blame the HVAC, check the glazing on that wall.
- Cracked glass, a bent frame, or a door that won’t lock. Cracks spread with thermal movement, and a frame that’s out of square usually means water is getting behind it. Both are worth a look before the next rain.
Our Windows & Doors Process – Step by Step
- 1
Walkthrough and measurement. We go through the house with you, opening by opening, and measure every unit rather than estimating from a photo. We look at the wall assembly, the trim, and the flashing on each opening, because those decide how the replacement goes.
- 2
Product selection with real options. You choose the material and the tier; we handle everything else. That means comparing impact-rated lines against energy-efficient lines, and frame options against what the opening and the sun exposure actually call for.
- 3
Written line-item estimate. You get a written quote that breaks out the units, the labor, and the trim and flashing work. The written estimate sets the final price. There are no change orders tacked on once the crew is on site.
- 4
Installation and sealing. We remove the old unit, check the rough opening for rot or water damage, flash and seal the new unit, and finish the interior and exterior trim. Any window or door work that touches the roofline or siding gets coordinated with the rest of the scope instead of handed off.
- 5
Final walkthrough and warranty conversation. We open and close every unit with you, check the locks and hardware, and confirm the cleanup. You get one warranty conversation covering the product and the installation, not a stack of separate contacts.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Hayward?
A typical window replacement project in Hayward runs $4,500 – $15,000, depending on how many openings you’re doing, the size of each unit, and the product tier you choose. A handful of standard-size windows in a mid-tier energy-efficient line sits near the low end of that range. A whole-house replacement, or a project with large sliders, custom geometric units, or impact-rated glazing, moves toward the top.
| Scope | Typical estimated range |
|---|---|
| Window replacement (standard openings, mid-tier glazing) | $4,500 – $8,500 |
| Window replacement (larger count, premium or impact-rated lines) | $9,000 – $15,000 |
| Entry door or patio slider replacement | Quoted per opening in the written estimate |
Three things move the number most: the count of openings, the size of the largest unit, and the glazing specification. Custom shapes and oversized sliders cost more because they’re templated and built to order. What’s included in a free estimate is the measurement, the product recommendation, and a written line-item breakdown of units, labor, trim, and flashing. To avoid overpaying, compare the glazing specification line by line rather than the total, and make sure flashing and trim are in the quote instead of showing up later. Call (833) 510-5312 for an exact quote, and the estimate is free.
Windows & Doors Near Hayward – Our Service Area
We work with homeowners across Hayward and the surrounding East Bay, including San Lorenzo, Ashland, San Leandro, and Oakland, along with the Peninsula cities of San Mateo, Foster City, Redwood City, Menlo Park, East Palo Alto, North Fair Oaks, and Alameda. Scheduling depends on the size of the project and the product lead time rather than distance. You can see the full range of what we handle on the construction Hayward page, from pavers and fencing to roofing, kitchens, bathrooms, and additions.
Serving Hayward, CA – Our Local Coverage Area
We serve Hayward and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Hayward
It covers installation and replacement of windows, entry doors, patio sliders, and the trim, flashing, and hardware that go with them. It includes new construction openings as well as swaps into existing walls. Custom and geometric units, impact-rated lines, and energy-efficient glazing all fall under the same category. We scope the whole set of openings together so the product choices stay consistent across the house.
A single door or a few windows is usually a short job; a whole-house replacement takes longer, and the biggest variable is product lead time rather than installation hours. Custom and geometric units are built to order, so they add time before the crew ever arrives. We give you a realistic timeline in the written estimate. Call (833) 510-5312 and we’ll talk through what your specific scope looks like.
Window replacement in Hayward typically runs $4,500 – $15,000, with the final figure driven by the number of openings, unit sizes, and the glazing and frame tier you choose. Impact-rated and premium thermal lines sit toward the upper end; standard openings in a mid-tier energy-efficient line sit toward the lower. The written estimate sets the final price, so the number you sign off on is the number you pay. Call (833) 510-5312 for a free estimate.
Yes. We work with Therma-Tru entry systems, ViewLux glazing lines, and Mr-Glass products, and we’ve handled each long enough to know where they wear and what they need at install. We’re not limited to those lines; they’re simply part of a broader product roster we draw from. Whether you have one of those makes or any other, we can help.
Same-day service is available depending on the scope and the product. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed on Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 510-5312 to schedule.
You get a workmanship warranty covering our installation, alongside the manufacturer’s product warranty on the windows and doors themselves. Because we handle so many trades under one contract, it stays one warranty conversation rather than a referral chain between a window installer and a separate trim carpenter. The specifics are laid out in your written estimate before work starts. Call (833) 510-5312 with questions about coverage.
Clear the floor and about three feet of space around each opening, and take down curtains, blinds, and anything hanging on the wall near the window. Move furniture and fragile items away from the work area, and plan for pets to be in a closed room while exterior doors are open. If you’re doing several openings, expect some rooms to be unavailable for part of the day. We confirm the schedule and the access plan with you before the crew arrives.
Schedule Your Windows & Doors Service in Hayward Today
Windows and doors are one of the few upgrades that pay you back every single day, in comfort and in how the house holds up. Our technicians have up to 11 years of experience, and we back the work with a written line-item estimate and a workmanship warranty. One contractor from the driveway to the kitchen means the window and door work doesn’t get stranded between trades. Call (833) 510-5312 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Hayward.