Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Hayward Homeowners Choose Therma-Tru Construction
Construction Hayward provides independent Therma-Tru construction service in Hayward, CA. We install, repair and service Therma-Tru fiberglass entry doors, patio doors and the hardware that hangs them, and we do it with quality parts that fit the door rather than defaulting to a full swap. We handle everything from the driveway to the kitchen, and that includes the door you walk through every day. Call (833) 510-5312 to schedule your free estimate.
Therma-Tru doors are common in Hayward’s 1950s-1990s tract and ranch housing, which means our technicians see the Fiber-Classic, Smooth-Star and Classic-Craft slabs often enough to know their sill and hinge hardware by feel. Our technicians have up to 11 years of experience on this kind of work.
We’re an independent service provider. Construction Hayward is not affiliated with, authorized by or a dealer for Therma-Tru, and we don’t claim to be. What we offer is straightforward knowledge of how these doors fail in the East Bay and how to fix them properly.
Why Trust Construction Hayward for Your Therma-Tru Construction?
A Therma-Tru door is a fiberglass system, not a wood door and not a steel one. The slab, the frame, the adjustable sill and the multi-point lock all work together, and each one fails in its own way. Getting the diagnosis right matters more than the repair itself. Our technicians know how a Fiber-Classic bottom rail behaves once water gets past a failed sill, and they know the difference between a slab that can be re-sealed and refinished and one that has already delaminated.
We use quality parts that fit Therma-Tru equipment, and we’ll tell you when a repair makes sense and when a replacement slab is the honest answer. That’s warranty-safe practice: a poor-fitting aftermarket sill or a mismatched hinge set puts stress on the frame and can compromise the door’s own finish coverage. We won’t put poorly fitting parts on a premium door to save a few dollars.
Hayward’s pre-1980 housing stock also means door frames here often carry surprises: a slightly out-of-square opening, a sill pan that was never installed correctly, an older remodel that moved a header. When a job pulls a permit and the address lands in a fault-zone review, we work with what the inspector requires rather than fighting it. The door still has to hang square, latch cleanly and shed water at the end of it all. Licensed and insured, free estimates, and a written line-item quote before anything starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Hayward
Therma-Tru doors hold up well. What wears them out here is water, sun and coastal air, plus a few hardware problems that show up on almost every aging slab. These are the calls we get most in Hayward.
- Bottom-rail water intrusion and finish flaking. The factory finish on the fiberglass slab edge and bottom rail is the door’s first defense. Once UV and moisture break it down, especially on the bottom rail where it sits closest to splash and sill water, the fiberglass can take on moisture, swell slightly and start to delaminate. Flaking near the threshold is the early warning, not the actual problem.
- Adjustable sill and threshold seal failure. The adjustable sill is what lets wind-driven rain and drafts past the door. West-facing Hayward entries get the worst of it: afternoon sun bakes the threshold, the weatherstrip dries out and shrinks, and the sill seal stops doing its job. You feel a draft before you see a leak.
- Sagging slabs and multi-point hardware misalignment. A heavy fiberglass slab on older hinges can drop a little over time. The multi-point lock then fails to line up and the door drags, latches poorly or won’t catch the top and bottom points at all. Usually the hinges have worn, and sometimes the frame has shifted with it.
- Fogged insulated glass units. When the seal on an insulated glass unit fails, moisture gets between the panes and the unit fogs. It’s a single component failure, not a door failure. The glass unit can be replaced without a new door in most cases, and patio door units often show it first.
- Weatherstrip and coastal-air wear. Bay Area sun and salt air dry out and shrink the weatherstrip around the frame. A door that seals fine in spring rattles and leaks by winter. Replacing the weatherstrip is inexpensive and restores the seal; leaving it lets water reach the frame and sill.
A typical Hayward case: a Therma-Tru Fiber-Classic entry door whose adjustable sill has failed, letting rain and drafts in and causing the bottom rail to swell, with the finish starting to flake near the threshold. A qualified local pro removes the slab, checks the frame for water damage, replaces the OEM sill and weatherstrip, re-seals and refinishes the bottom rail, then re-hangs the door with fresh hinges and a realigned multi-point lock. If the fiberglass skin has already delaminated, the honest recommendation is a replacement slab rather than a patch that fails again in a season.
Therma-Tru Parts & Our Repair-vs-Replace Approach
For a Therma-Tru door, owners should insist on genuine Therma-Tru replacement hardware: sills, weatherstrip, hinges, multi-point locks and glass units. Aftermarket parts fit poorly and can void the door’s own finish warranty. A quality aftermarket glass unit is acceptable when the OEM unit isn’t available, but the structural hardware is where we stay with the original specification. We don’t stock OEM or genuine Therma-Tru parts; we source the right part for your door when you book the work.
Our stance is simple. Repair the sills, hardware and finish when the slab is structurally sound. The fiberglass is sound, the frame is dry, the door just needs its sealing hardware back in spec. Replace when the fiberglass skin or the frame has taken on water and delaminated. Patching a delaminated slab buys a year at most before the same leak returns. We’ll walk you through what we see and let the condition of the door make the call, not a sales target.
Call (833) 510-5312 for a free estimate and an honest read on your door.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We check the slab, the frame and the sill together. Water usually enters at the sill and shows up at the bottom rail, so we test the sill seal, look for swelling at the slab edge, check the weatherstrip and operate the multi-point lock through its full range. That’s how we tell a hardware problem from a water problem.
- 2
Repair or install. For a repair, we remove the slab if needed, replace the OEM sill, weatherstrip and worn hinges, then re-seal and refinish the bottom rail. For an install, we set the frame plumb and square, install a proper sill pan and flashing, and hang the slab with the multi-point hardware aligned exactly.
- 3
Test. We operate the door and confirm the multi-point lock engages at every point, the slab doesn’t drag, the seal is tight and the threshold sheds water away from the house. On a Hayward hillside home we also check that drainage runs away from the entry, not toward it.
- 4
Warranty. We leave you with a written record of the parts used and the work performed, so the door’s own coverage stays clean. Our workmanship is covered by our warranty, and we’ll answer for it.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Hayward
We service and install the Therma-Tru product types you’ll find on Hayward homes: fiberglass entry doors across the Fiber-Classic, Smooth-Star and Classic-Craft collections, and Therma-Tru patio and French door systems with multi-point hardware. That covers the slab, the frame, the adjustable sill, the hinges, the weatherstrip and the glass units, plus re-hanging and re-aligning doors that have dropped or stopped latching. We handle finish repair and refinishing on doors whose factory finish has broken down at the bottom rail. Whether you own a door that needs its sill replaced or you’re choosing a new entry door for a remodel, the same crew can install it correctly and stand behind the work. If it’s a canopy, a handle or a whole new door, it’s the same conversation.
We Also Service These Brands
We’re not a single-brand shop. We also work with KraftMaid cabinets, Cambria and Silestone countertops, and Kohler fixtures, among 50+ name-brand product lines across the trades we cover. That matters for a Hayward homeowner planning several projects at once. When a new entry door sits beside a bathroom remodel and a kitchen update, one contractor handles the whole scope, and you choose the material. We handle everything else.
FAQs – Therma-Tru Construction Service in Hayward
Is Construction Hayward authorized by Therma-Tru? No. We are an independent Therma-Tru service provider, not a dealer, not authorized by Therma-Tru and not affiliated with the manufacturer. We install, repair and service Therma-Tru doors with quality parts that fit them, and we’ll always be clear about that.
Do you use quality parts that fit Therma-Tru equipment? Yes. For sills, hinges, weatherstrip, multi-point locks and glass units we use genuine Therma-Tru replacement hardware wherever it’s available, because aftermarket parts fit poorly and can void the door’s finish warranty. A quality aftermarket glass unit is acceptable when the OEM unit isn’t available. We don’t stock OEM parts; we source the right part when you book the work.
How long does Therma-Tru service take? A sill, weatherstrip or hinge replacement is usually a single visit. A full entry door replacement takes longer, since the frame, sill pan and flashing all have to be set correctly. We’ll give you a clear timeline in the written estimate so you know what to expect before work starts. Call (833) 510-5312 for a free estimate.
What kinds of Therma-Tru products do you cover? Fiberglass entry doors in the Fiber-Classic, Smooth-Star and Classic-Craft collections, plus Therma-Tru patio and French door systems with multi-point hardware. That includes slab repair, frame work, sill and threshold replacement, hinge and lock alignment, weatherstrip and glass unit replacement.
Does an independent Hayward pro void my Therma-Tru warranty? Not when the work is done correctly. Using genuine Therma-Tru hardware and following the manufacturer’s installation requirements is what keeps the door’s finish coverage intact. Poor-fitting aftermarket parts are the real risk. We document the parts we use so your coverage stays clean.
How much does Therma-Tru construction cost in Hayward? Window replacement involving Therma-Tru entry door glass or patio door units runs $4,500-$15,000; a bathroom remodel next to that door and glass work runs $9,000-$28,000; and a frameless glass shower enclosure runs $4,500-$12,000. These are typical estimated ranges, and the written estimate sets the final price. Call (833) 510-5312 for an exact quote – estimates are free.
| Therma-Tru Service | Typical Estimated Range |
|---|---|
| Window Replacement (Therma-Tru entry door glass / patio door units) | $4,500-$15,000 |
| Bathroom Remodel (adjacent bath-door and glass work) | $9,000-$28,000 |
| Frameless Glass Shower Enclosure | $4,500-$12,000 |
Book Your Therma-Tru Service in Hayward, CA
Whether your Therma-Tru door needs its sill replaced, its multi-point lock realigned, or a whole new slab, Construction Hayward can take a look and give you a straight answer. Call (833) 510-5312. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Free estimates, written line-item quotes, and fixed pricing with no change orders.
Written by the team at Construction Hayward.