Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Hayward Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Hayward, CA: cabinet installation and refacing, kitchen design and layout, and full kitchen remodeling for owners whose KraftMaid boxes, fronts, glides and finishes need repair or replacement. What makes our KraftMaid work different is that we know the boxes before we touch the doors. We’re not affiliated with, authorized by or endorsed by KraftMaid; we’re an independent provider working on the brand daily in Hayward’s ranch and split-level kitchens. Call (833) 510-5312. We answer 24/7.
Hayward’s housing stock is mostly mid-century, 1940s through 1970s, and a lot of it is stucco-and-wood-frame on flatland lots or hillside homes in the Hayward Hills. KraftMaid cabinetry shows up in that stock often as an upgrade made ten or twenty years back, or as original install in a kitchen that’s never been touched. Both read the same on a site visit. What we look at is the box under the finish: plywood versus particleboard, glide generation, hinge condition, and whether the front sits flush because the box is square or because the hinges were shimmed to hide a sag.
Why Trust Construction Hayward for Your KraftMaid Construction?
Our technicians have up to 11 years of experience, and a large share of that work is KraftMaid-specific: full-access plywood boxes with full-overlay doors, the painted and glazed finishes on Marquee fronts, and the dovetail drawer boxes in Deluxe and Premier series. We know the construction differences well enough to tell you which of them drives the failure you’re looking at.
We use genuine KraftMaid door fronts, drawer boxes, glides and hinges where the series is still supported. When original hardware is discontinued, we source quality aftermarket soft-close glides or hinges that fit without drilling new holes or widening the front. On the install side, we work with KraftMaid frameless and semi-custom cabinetry, soft-close undermount glides, and the layout work that has to happen before a single box goes in.
Warranty-safe service matters here. Cabinet warranties are usually void when a non-qualified person drills, cuts or replaces originals with unapproved hardware. We keep installs and repairs inside a warranty-safe scope: original hole patterns preserved where we can, correct glide replacements, correct hinge types, and no modification to the box that would trip a claim. That’s what you’re paying for with a trained technician, not just the labor.
The Hayward Fault reality is part of every kitchen we walk into. Seismic retrofits and soft-story upgrades change what’s behind a wall, and Alquist-Priolo fault-zone review can pull up an address before a permit clears. A cabinet run that sits over a retrofit or a foundation repair sometimes needs to come out and go back in. We plan for that in the scope so a KraftMaid kitchen in Hayward isn’t blown apart by a structural surprise mid-project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Hayward
Here’s what KraftMaid service in Hayward usually involves. The brand’s cabinet construction is durable, but every type of cabinet shows predictable failures after a decade or two of daily use. These five cover most of what we find.
- Marquee finish delamination and blistering. The painted and glazed finishes on KraftMaid Marquee fronts blister and lift at the edges when the kitchen runs humid through the wet season and dry through summer. The East Bay microclimate is mild but the humidity swings are real, and bath cabinets on the same house often show it first. It’s not a defect in the paint; it’s moisture working under a finish that wasn’t designed for repeated vapor cycles.
- Drawer glides failing or losing soft-close tension. Older Deluxe-series boxes with original glides start to catch halfway, feel heavier than they should, and stop self-closing cleanly. Under daily load, the glide carriage wears, the spring tension goes soft, and eventually the drawer sags enough that the front drops out of alignment with its neighbors.
- Sagging or cracked particleboard box corners and stiles. Particleboard boxes lose compression strength over years of hinge stress, and the corner where the stile meets the rail is where it shows first. You get a door that won’t sit flush no matter how the hinges are adjusted, or a visible hairline crack in the stile at the hinge plate.
- Door and drawer-front warping near heat sources. Slab and wood-grain fronts warp on the cabinet directly beside the range or above the dishwasher, where steam and radiant heat cycle the front every day. A slight bow is normal in a wood product; the failure is when the warp is visible from the room.
- Face-frame joint separation and toe-kick swelling. Slow leaks under a sink or behind an island drip into the toe-kick and the face-frame joints, and swollen MDF or particleboard in those spots is the first visible sign. By the time the finish lifts, the leak has usually been there for months.
KraftMaid Parts & Our Repair-vs-Replace Approach
How we decide between repairing a KraftMaid cabinet and replacing the run comes down to two questions. Are the boxes plywood and square? And are the finishes failing across a few fronts or across the whole run?
When the boxes are sound, we repair. That means genuine KraftMaid door fronts, drawer boxes, glides and hinges where the series is still supported, and quality aftermarket soft-close glides or hinges when the originals are discontinued and no good fit is left. New hardware that fits without enlarging holes or shifting the front keeps the cabinet on its original footprint and preserves the warranty where it applies. We’re not a KraftMaid dealer, and we don’t stock or carry OEM parts as inventory; what we do is source what fits and use it correctly.
When box corners are failing, when face-frame joints have separated, or when Marquee finishes are blistered across several fronts rather than one, the honest call shifts to replacement or a partial reface. Spot-repairing a run that’s already past that point spends money twice. Call (833) 510-5312 and we’ll tell you which side of that line your kitchen is on.
Typical costs for KraftMaid work in Hayward
These are typical estimated ranges for Hayward projects. The written estimate sets the final price, and every estimate we give is free and line-item.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Bathroom Remodel | $9,000 – $28,000 |
How a typical KraftMaid kitchen job usually goes
A typical KraftMaid kitchen job starts with doors that no longer sit flush and drawers that catch halfway, usually traced to worn original glides or swollen particleboard box corners rather than the door fronts. A qualified local pro pulls a few fronts, checks box square and hinge plates, replaces glide sets or rebuilds the failing boxes with matching KraftMaid or quality aftermarket parts, and then re-hangs and adjusts the doors. When the finish is blistering across multiple Marquee fronts, the honest call shifts toward full door-and-drawer replacement or a partial reface rather than spot repair. In Hayward, the same job often pulls in layout work: galley kitchens in mid-century homes are the most common reason owners ask about a partial reconfigure while the cabinets are already out.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We pull a sample of fronts and drawers, check box square with a framing square, inspect hinge plates and glide carriages, and look inside the base cabinets for water staining on the toe-kick and the floor deck. KraftMaid-specific: we identify the box type (full-access plywood, or particleboard), the glide generation, and whether the fronts are painted, glazed or wood-grain, because that drives which replacement parts are still available.
- 2
Repair or install. On repair, the worn glides, hinges or box components come out and the correct replacements go in, keeping original hole patterns where possible. On install, KraftMaid frameless or semi-custom boxes get shimmed to the actual wall line; on Hayward homes with out-of-square walls from the 1940s through 1970s, that means scribing the fillers and planing the face frames rather than prefitting a box to a wall that was never square to begin with.
- 3
Test and adjust. Every door and drawer goes through a full open-close-move cycle. Soft-close glides get checked at load. Hinge plates get adjusted so doors sit flush within a fraction of an inch across the run. Warped fronts get flagged so you know before we leave whether they’ll need replacing.
- 4
Warranty conversation. We tell you what we did, what we replaced, and what paperwork your KraftMaid warranty claim or our workmanship warranty needs to reflect it. If the box construction is compromised in a way that the manufacturer’s terms cover, we say so plainly so you can pursue it directly.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Hayward
We service and install KraftMaid kitchen cabinetry across the brand’s semi-custom and frameless lines: full-access plywood boxes with full-overlay doors, the painted and glazed Marquee fronts, and the dovetail drawer boxes in Deluxe and Premier series. That covers base cabinets, wall cabinets, tall pantry boxes, drawer banks and islands. We also handle the cabinet-adjacent work that decides whether a KraftMaid install looks finished: countertop installation, backsplash, and the kitchen design and layout work that sets the cabinet run in the first place. Cambria, Silestone and Caesarstone are among the countertop lines we work with, so the cabinet and stone decisions happen on the same visit instead of two.
We Also Service These Brands
KraftMaid is one line among the 50+ product brands we work with, which is the point of hiring a general contractor rather than a single-brand specialist. On the other cabinetry side that’s Wellborn. On the stone side it’s Cambria, Silestone and Caesarstone. On fixtures it’s Kohler, Toto and Grohe. If your kitchen has mixed brands or you’re weighing a KraftMaid reface against a Wellborn replacement, we can quote both without you chasing a second bid.
FAQs – KraftMaid Construction Service in Hayward
No. We are an independent KraftMaid service provider and are not authorized, certified, sponsored or endorsed by the manufacturer. That means the work we do on your cabinets is our own, backed by our workmanship; anything governed by KraftMaid’s manufacturer warranty is between you and KraftMaid, and we scope our work to keep any active claim intact.
Yes, in most cases. If the series is still supported, we source a genuine KraftMaid front in the same profile and finish. If it’s been discontinued, we look at whether the remaining fronts can be refaced to a consistent look or whether a partial replacement makes more sense than a mismatched repair. Call (833) 510-5312 and send a photo of the front; we can tell you which path is realistic before you commit to anything.
Catching almost always comes from worn glides or swollen particleboard in the box, not from the drawer front. Over years of daily load, the glide carriage wears and loses soft-close tension, and on older Deluxe-series boxes the particleboard at the drawer sides can absorb moisture and go tight against the glide. The fix is replacing the glide set and, where the box is compromised, the drawer box itself. It’s usually a short job once we’ve identified the glide generation. Call (833) 510-5312 to book a look.
Refacing makes sense when the boxes are plywood, square and dry, and the finish failure is cosmetic. Replacement makes more sense when the box corners are failing, the face-frame joints have separated, or Marquee finishes are blistering across multiple fronts. The cost difference is real: a partial reface on a small kitchen sits closer to the low end of our $9,000 – $20,000 small-kitchen range, while full replacement with new cabinet installation typically runs $4,000 – $13,000 for the cabinets alone before the rest of the remodel. Call (833) 510-5312 for a written estimate that puts both options on paper.
Moisture cycling. Hayward’s fog-influenced winters and dry summers push vapor through a kitchen every year, and painted and glazed finishes blister when vapor repeatedly gets behind the finish at an edge or a joint. Bath cabinets on the same house often show it first because the vapor load is heavier. Once blistering covers multiple fronts, refinishing is the realistic fix; a single spot repair usually lifts again within a season.
Yes, and that’s the normal case in Hayward rather than the exception. Most of the stock here was built between the 1940s and 1970s, and interior walls in those homes are rarely plumb or square. We shim and scribe the cabinet run to the actual wall line, use fillers to close the gaps, and plane face frames where the run has to sit against a bow in the wall. KraftMaid frameless boxes tolerate this well as long as the installer plans for it before the first box goes up. Call (833) 510-5312 to schedule a measurement.
Typical estimated ranges in Hayward: cabinet installation $4,000 – $13,000, a full kitchen remodel $14,000 – $45,000, and a small kitchen remodel $9,000 – $20,000. If the job includes countertops or backsplash, add $2,000 – $6,500 and $800 – $2,500 respectively. These are estimates; the written estimate sets the final price. Call (833) 510-5312 for an exact quote. Estimates are free.
Book Your KraftMaid Service in Hayward, CA
If your KraftMaid cabinets need repair, refacing or a full kitchen install in Hayward, we’ll come measure, tell you honestly whether the boxes are worth saving, and put the price on paper before any work starts. One contractor, one estimate, one warranty conversation. Call (833) 510-5312. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Hayward.